Specifications of the Scanner unit for SK200-09
物理特性表
| Document width |
Maximum width: 965 mm; minimum width: 257 mm |
| Maximum width: 38 inches ; minimum width: 10.12 inches |
| Document length *1 |
Maximum length: 16 m; minimum length: 210 mm |
| Maximum length: 629.9 inches ; minimum length: 8.27 inches |
| Effective scanning width |
Maximum width: 932.2 mm (centered), Minimum width: 50mm |
| Maximum width: 36.70 inches (centered), Minimum width: 1.97 inches |
| Effective scanning length |
Maximum length: 16 m; minimum length: 30 mm |
| Maximum length: 629.9 inches ; minimum length: 1.18 inches |
| Document size *1 |
JIS A0,A1,A2,A3,A4 |
| DIN A0,A1,A2,A3,A4 |
| ANSI Engineering E,D,C,B,A |
| ANSI Arch E,D,C,30/36inch |
| Document thickness |
Up to 0.8 mm (including the carrier sheet) |
| Up to 0.031inches (including the carrier sheet) |
| Scanning margins |
Leading edge, trailing edge: 4mm+-0.5mm for each margin |
| Leading edge, trailing edge: 0.157inches+-0.020 inches for each margin |
| Scanning system |
Main scanning system |
Contact image system (five A4 sensors in a zigzag pattern) |
| Sub scanning system |
Document travel (sheet through) system |
| Scanning surface |
Upper surface |
| Optical resolution |
600dpi |
| Interpolated resolution |
100/200/300/400/600/800/1200dpi |
| Scanning mode |
High-speed scan / Normal scan / High quality scan |
| Scanning precision *2 |
+-0.1% or +-1 pixel, whichever is larger |
| Gradation |
Monochrome |
Bilevel, intermediate tones (dithering, error diffusion) |
| Gray |
256 shades |
| Color |
24-bit |
| Threshold value |
A DSP (digital signal processor) enables automatic setting of the threshold value |
| (monochrome scans only) |
| Color space |
sRGB |
| Interface |
USB2.0 (High-speed) |
| Output |
Image data |
| Rated power supply |
100 to 120/200 to 230 VAC +-10%, 50/60 Hz |
| Operating environment |
Temperature: 10 to 30°C, Humidity: 20% to 80% R.H. (non-condensing) |
| Power consumption |
60 W or less (12 W or less in power-saving mode*3) |
| External dimensions (approx.) |
1,190mm * 405mm * 445mm |
1,185mm * 1,100mm * 715mm |
| Safety/EMC certificate |
UL, FCC class B (USA), CE mark (EU) |
*1 If the document is a long-length document, the actual length that can be scanned is limitedby the available memory (hard disk or other data storage device) of the computer to whichthe scanner is connected, and also by the grade of the medium being scannd.
*2 Notes on scanning precisionThe scanning precision may vary slightly depending on the grade and thickness of the medium beingscanned, and on the operating conditions. The precision figures above were measured under the Graphtec specified operating conditions.
*3 Only when the power supply is 100 to 120 VAC.
Specifications of the Software for SP200W
| Software name |
OPS123 (Scanning ARTS SP) |
| Copy |
Copy settings |
Number of copies (1 to 999) |
| Continuous copying (continuous printing and scanning) |
| Scan |
Output data format |
TIFF(G4), PLC, PCX, CG4, TIFF, BMP, JEPG, Grayscale etc. |
| Parameter settings |
Simple document type selection *5 |
| Document size |
| Automatic despeckling function (pixel level) |
| Continuous scanning |
| Automatic file naming |
| High-speed scanning |
| Color adjustment |
User-defined document creation |
| Scanning resolution setting |
| Hue, chroma, and luminosity adjustment (for 24-bit color) |
| Gamma, brightness, and contrast adjustment (for grayscale) |
| Black/white level setting |
| Display |
Scanner status display |
| Scan preview |
| Miscellaneous |
sRGB support |
| Print |
Input data format |
TIFF(G3/G4), BMP, JEPG, PLC, PCX, CG4 etc. |
| Settings |
Print size selection (enlarge/reduce function) |
| Zooming (25% to 400% in 1% increments) |
| Number of prints (1 to 999) |
| Reprints (1 to 999) |
| Margin settings |
| Print position specification (center/left margin, top margin) |
| Continuous printing |
| Rotate (90-degree steps) |
| Negative output, left/right reflection |
| Copying speed |
Print mode |
High speed |
Standard |
High quality |
| - Paper size : A1 size |
Monochrome |
1min 33sec |
4min 33sec |
5min 17sec |
| - Media : Standard paper |
Color |
4min 21sec |
9min 02sec |
15min 27sec |
*5 Monochrome: Maps/drawings (grayscale/monochrome), faint blueprints (monochrome), dark blueprints (monochrome), posters (grayscale), photographs (grayscale)Color: Photographs (full color), posters (full color), maps/drawings (full color/marker pen emphasis)"
Hardware requirements for SP200W
| Item |
Specification |
| 1 |
CPU |
Pentium III 1GHz (Pentium 4 2GHz) |
| 2 |
Memory |
256MB or more (1GB or more) |
| 3 |
Free space on the HDD |
10GB or more (30GB or more) |
| 4 |
OS |
Windows2000,Windows XP |
| 5 |
Interface |
USB2.0 (High speed) * 2 ports |
* Suggested hardware requirements is in "( )". |
|
