Specifications of the Scanner unit for SK200-09

物理特性表

Document width	Maximum width: 965 mm; minimum width: 257 mm
	Maximum width: 38 inches ; minimum width: 10.12 inches
Document length *1	Maximum length: 16 m; minimum length: 210 mm
	Maximum length: 629.9 inches ; minimum length: 8.27 inches
Effective scanning width	Maximum width: 932.2 mm (centered), Minimum width: 50mm
	Maximum width: 36.70 inches (centered), Minimum width: 1.97 inches
Effective scanning length	Maximum length: 16 m; minimum length: 30 mm
	Maximum length: 629.9 inches ; minimum length: 1.18 inches
Document size *1	JIS A0,A1,A2,A3,A4
	DIN A0,A1,A2,A3,A4
	ANSI Engineering E,D,C,B,A
	ANSI Arch E,D,C,30/36inch
Document thickness	Up to 0.8 mm (including the carrier sheet)
	Up to 0.031inches (including the carrier sheet)
Scanning margins	Leading edge, trailing edge: 4mm+-0.5mm for each margin
	Leading edge, trailing edge: 0.157inches+-0.020 inches for each margin
Scanning system	Main scanning system	Contact image system (five A4 sensors in a zigzag pattern)
	Sub scanning system	Document travel (sheet through) system
Scanning surface	Upper surface
Optical resolution	600dpi
Interpolated resolution	100/200/300/400/600/800/1200dpi
Scanning mode	High-speed scan / Normal scan / High quality scan
Scanning precision *2	+-0.1% or +-1 pixel, whichever is larger
Gradation	Monochrome	Bilevel, intermediate tones (dithering, error diffusion)
	Gray	256 shades
	Color	24-bit
Threshold value	A DSP (digital signal processor) enables automatic setting of the threshold value
	(monochrome scans only)
Color space	sRGB
Interface	USB2.0 (High-speed)
Output	Image data
Rated power supply	100 to 120/200 to 230 VAC +-10%, 50/60 Hz
Operating environment	Temperature: 10 to 30°C, Humidity: 20% to 80% R.H. (non-condensing)
Power consumption	60 W or less (12 W or less in power-saving mode*3)
External dimensions (approx.)	1,190mm * 405mm * 445mm		1,185mm * 1,100mm * 715mm
Safety/EMC certificate	UL, FCC class B (USA), CE mark (EU)

*1 If the document is a long-length document, the actual length that can be scanned is limitedby the available memory (hard disk or other data storage device) of the computer to whichthe scanner is connected, and also by the grade of the medium being scannd.

*2 Notes on scanning precisionThe scanning precision may vary slightly depending on the grade and thickness of the medium beingscanned, and on the operating conditions. The precision figures above were measured under the Graphtec specified operating conditions.

*3 Only when the power supply is 100 to 120 VAC.

Specifications of the Printer unit for SP200W

Printing system	Thermal inkjet
Print heads	Black, Color(C/M/Y nozzles combined)
Ink	4 colors (Bk, C, M, Y)
Printing resolution	Color	4800 * 1200 dpi max.
	Monochrome	2400 * 1200 dpi max.
Allowable paper sizes	ISO A1,A2,A3,A4,B2,B3,B4
	DIN A1,A2,A3,A4
	ANSI 22*34, 17*22, 11*17, 8.5*11(inch)
	ANSI Arch 24*36, 18*24, 12*18, 9*12(inch)
	JIS B2,B3,B4
Allowable paper thickness	0.065mm to 0.190 mm
	0.0026inches to 0.0075 inches
Margins ("Narrow" setting)*4	Cut sheets	Leading edge, trailing edge, left/right edges: 5 mm for each margin
	Roll paper	Leading edge, trailing edge, left/right edges: 5 mm for each margin
Margins (accuracy guaranteed)	Cut sheets	Leading edge 5 mm, trailing edge 13 mm, left/right 5 mm
	Roll paper	Leading edge, trailing edge, left/right edges: 5 mm for each margin
Maximum printing length	Cut sheets	1.4m (55.12inches)
	Roll paper	18m (708.66inches)
Paper supply switching	Manual switching between roll paper and cut sheets
Distance accuracy	±0.1% or ±0.1 mm, whichever is larger
	±0.1% or ±0039inch, whichever is larger
	(after user distance compensation has been performed)
Buffer capacity	32MByte
Interfaces	Standard: USB 2.0 Full-speed
Rated power supply	100 to 240 VAC, 50/60 Hz
Operating environment	Temperature: 15 to 30°C, Humidity : 20 to 80% RH (non-condensing)
	barometric: 840hPa or less
Power consumption	During operation: 50 W or less; Standby status: 10 W or less
Safety/EMC certificate	UL, FCC classB (USA), CE mark (EU)

*4 SP200W cannot be printed without margins.

Specifications of the Software for SP200W

Software name		OPS123 (Scanning ARTS SP)
Copy	Copy settings	Number of copies (1 to 999)
		Continuous copying (continuous printing and scanning)
Scan	Output data format	TIFF(G4), PLC, PCX, CG4, TIFF, BMP, JEPG, Grayscale etc.
	Parameter settings	Simple document type selection *5
		Document size
		Automatic despeckling function (pixel level)
		Continuous scanning
		Automatic file naming
		High-speed scanning
	Color adjustment	User-defined document creation
		Scanning resolution setting
		Hue, chroma, and luminosity adjustment (for 24-bit color)
		Gamma, brightness, and contrast adjustment (for grayscale)
		Black/white level setting
	Display	Scanner status display
		Scan preview
	Miscellaneous	sRGB support
Print	Input data format	TIFF(G3/G4), BMP, JEPG, PLC, PCX, CG4 etc.
	Settings	Print size selection (enlarge/reduce function)
		Zooming (25% to 400% in 1% increments)
		Number of prints (1 to 999)
		Reprints (1 to 999)
		Margin settings
		Print position specification (center/left margin, top margin)
		Continuous printing
		Rotate (90-degree steps)
		Negative output, left/right reflection
Copying speed		Print mode	High speed	Standard	High quality
- Paper size : A1 size		Monochrome	1min 33sec	4min 33sec	5min 17sec
- Media : Standard paper		Color	4min 21sec	9min 02sec	15min 27sec

*5?Monochrome: Maps/drawings (grayscale/monochrome), faint blueprints (monochrome), dark blueprints (monochrome), posters (grayscale), photographs (grayscale)Color: Photographs (full color), posters (full color), maps/drawings (full color/marker pen emphasis)"

Hardware requirements for SP200W

Item		Specification
1	CPU	Pentium III 1GHz (Pentium 4 2GHz)
2	Memory	256MB or more (1GB or more)
3	Free space on the HDD	10GB or more (30GB or more)
4	OS	Windows2000,Windows XP
5	Interface	USB2.0 (High speed) * 2 ports

* Suggested hardware requirements is in "( )".